66 31 010 Instructions for ACC adjusting device

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Requirements for the measurement area for ACC adjusting device

Dimensions:

Area behind the mirror of at least 80 cm that cane be entered
Distance between mirror and vehicle 80 cm +/- 5 cm
Total area of work area 360 cm x 660 cm

Fig 1: Identifying Dimensions

Courtesy of BMW OF NORTH AMERICA, INC.

Maximum irregularity of floor surface:

Floor surface - adjusting device ≤ 1 mm
Floor surface - vehicle ≤ 10 mm

Fig 2: Identifying Maximum Upward/Downward Incline Angles

Courtesy of BMW OF NORTH AMERICA, INC.

Maximum angle of inclination of floor surface - vehicle:

Downward incline of floor surface maximum 3°, see graphic above (1)
Upward incline of floor surface maximum 1°, see graphic above (2)

Setting up the ACC adjusting device (one-off task) comprises the following steps:

Assembly of adjusting device
Assembly of rail
Basic setting of adjusting device on measurement area