65 50... Removing and installing/replacing trim for rear cabin monitor base in middle

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317 , see 00 9 317 TRIM PANEL WEDGE .

IMPORTANT: Trims may only be replaced in pairs so as to avoid differences in color.

Move rear cabin monitor (1) into position illustrated.

Fig 1: Identifying Rear Cabin Monitor And Trims

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove trim (2) in downward direction.

Fig 2: Identifying Trim And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) must not be damaged

Fig 3: Identifying Lugs Location

Courtesy of BMW OF NORTH AMERICA, INC.