64 11 939 Replacing (one) temperature sensor for heater

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove INSTRUMENT PANEL, see 65 13 065 REMOVING AND INSTALLING/REPLACING FRONT SPEAKER CARRIER (INSTRUMENT PANEL) .

Unlock temperature sensor (1) and feed out.

Fig 1: Identifying Temperature Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect cables (1).

Connect cables to new temperature sensor with butt connectors and heat-shrink sleeves.

Insulate cables with insulating tape.

Fig 2: Disconnecting Cables

Courtesy of BMW OF NORTH AMERICA, INC.