64 11 822 Replacing servodrive for left rear cabin blending flap

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove CARRIER FOR INSTRUMENT PANEL

Release screws (1) and feed out air duct (2).

Fig 1: Identifying Feed Out Air Duct And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screws (2) and remove servodrive (3).

Fig 2: Identifying Servodrive And Screws

Courtesy of BMW OF NORTH AMERICA, INC.