64 12 670 Replacing front electric auxiliary heater

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove CARRIER FOR INSTRUMENT PANEL

NOTE: For purposes of clarity, the following graphics show the heater/air conditioner removed.

Disconnect plug connection (1).

Fig 1: Identifying Plug Connection And Screw

G04792620

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Lay servomotor (2) to one side.

Fig 2: Identifying Servomotor And Screws

G04792621

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Fig 3: Identifying Servomotor Screw Location

G04792622

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (2) and remove housing side section (2).

Fig 4: Identifying Housing Side Section And Screws

G04792623

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screw (2).

Pull out electric auxiliary heater (3) and detach associated ground cable (4).

Installation:

Make sure ground cable (4) is securely seated.

Fig 5: Identifying Electric Auxiliary Heater And Screws

G04792624

Courtesy of BMW OF NORTH AMERICA, INC.