63 21 104 Replacing sealing frame for left or right rear light (on tailgate) from version 3/2010
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear light .
Detach sealing frame for rear light (1) from rear light (2). Installation note: Clean bonding surface. Make sure sealing frame for rear light (1) is correctly positioned and bonded all round on rear light (2).