62 11 280 Removing and installing (replacing) instrument cluster

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection , see 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) ).

Extend steering wheel completely and lower.

Release screws (1). Tightening torque 62 11 1AZ , see 62 11 INSTRUMENT CLUSTER .

Pull instrument cluster (2) forwards a little.

Disconnect associated plug connection.

Remove instrument cluster (2).

Fig 1: Removing Instrument Cluster

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out vehicle programming/coding .

Check values for Condition Based Service (CBS , see 61 00 ... DIAGNOSIS FOR CONDITION BASED SERVICE ) and correct if necessary.