51 34 380 Removing and installing/replacing decorative strip on rear door (top), left or right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Starting at rear, pull off seal (1) towards front.

Installation:

Moisten seal (1) with water before fitting.

Fig 1: Identifying Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip decorative strip (1) at retainers (2) in outward direction.

Installation:

If necessary, replace faulty retainers (2).

Make sure decorative strip is correctly seated on all seals.

Fig 2: Uncoupling Decorative Strip At Retainers In Outward

Courtesy of BMW OF NORTH AMERICA, INC.