51 23 131 Adjusting left or right striker on engine hood/bonnet

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Adjusting striker is described in:
Adjusting engine hood/bonnet

Unfasten screws (1) and remove striker (2).

Tightening torque 51 23 3AZ , see 51 23 HOOD/BONNET LOCKS .

Left side only:

Disconnect Bowden cable (3).

Installation:

Adjusting hood/bonnet

Fig 1: Identifying Striker And Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.