Equipment compartment partition wall, left
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Release expansion rivet (1).
Release screws (2, 4).
Left only: Unclip connecting cable (3).
Remove partition wall (5).
Installation:
Replace damaged expander rivet.
Make sure partition wall is correctly positioned.
Make sure screws are installed in correct positions.