51 71 470 Removing and installing/replacing trim on front left or right wheel arch
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 2 230 , see 00 2 230 BLIND RIVETING TONGS FOR PLASTIC RIVETS .
NOTE:
The operation is described on the left side; proceed in the same way for the right side.
Release blind rivets (1).
Unclip trim (2) outwards.
Installation:
Make sure trim (2) is correctly seated on underside protection and frame side member.
Installation:
Apply blind rivets with special tool 00 2 230. Catches (1) on trim (2) must not be damaged.