LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2114 (Body Equipment - Repair) >> Gaskets, Seals >> 51 71 280 Removing and installing/replacing units compartment partition wall >> Units compartment partition wall, right

Units compartment partition wall, right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Release clip (1).

Unfasten screws (2).

Remove partition wall (3).

Installation note: 

If necessary, replace faulty clip (1).

Make sure partition wall is correctly positioned.

Make sure screws are installed in correct positions.

Fig 1: Identifying Partition Wall, Clips And Screws
G08529490Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals