Units compartment partition wall, middle

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Remove gasket (1) for engine compartment lid.

Release screws (2, 4).

Remove partition wall (3).

Installation note:

Make sure partition wall is correctly positioned.

Fig 1: Identifying Gasket, Partition Wall And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Version with N55 engine only:

SEAL the units compartment partition wall at the top center.