51 33 000 Removing and installing (replacing) power window unit in left or right front door: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When removing door lock, snap door window glass out only, do not remove, secure in door window frame.

Necessary preliminary tasks:

Remove front door window glass, see 51 32 170 Removing and installing/replacing door window glass, front left or right .

Release cable in area (A) from holder.

Release nuts (1) and feed out rear section of power window unit (2).

Tightening torque 51 33 1AZ , see 51 33 POWER WINDOWS, FRONT .

Fig 1: Identifying Power Window Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and feed out front section of power window unit (2).

Tightening torque 51 33 1AZ , see 51 33 POWER WINDOWS, FRONT .

Fig 2: Identifying Nuts And Power Window Unit

Courtesy of BMW OF NORTH AMERICA, INC.