3.3 Installation of spacer (spacer buffer/dual-lock tapes)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Remove all remnants of existing spacers completely before sticking on new spacers.
The exact position of the spacers must be retained (see vehicle-specific repair instructions).
Incorrectly fitted spacers will result in:
- Window glass breakage due to tension
- Leakage (if the spacer is in the adhesive area)
- Wind noises