51 47 491 Removing and installing/replacing rear underbody protection
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Illustration created using X5 3.0i as an example. There may be differences in detail in the case of other models.
Release screws (1) and remove underbody protection (2).
Installation:
Centre underside protection (2) and tighten down screws (1).