51 47 128 Removing and installing/replacing panel for luggage compartment floor: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Push retaining spring (1) to end of gas-filled strut.

Remove gas-filled strut from ball head.

Firmly pull luggage compartment floor (2) towards rear and thereby disengage from hinges (3).

Fig 1: Pushing Retaining Spring To End Of Gas-Filled Strut

Courtesy of BMW OF NORTH AMERICA, INC.