51 14 110 Removing and installing/replacing rear model designation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The "Instructions for number/letter combination cementing"
serve as the basis for these repair instructions and must be followed without fail, see 51 14... Instructions for attaching number/letter designation combination .
Mark dimensions (A and B) on rear lid.
A = 20 mm; B = 146 mm
Stick on model designation using markings.
NOTE:
Measurement "C" is for information purposes only, as it is determined by support film.
C= 9.2 mm