After Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If the hinge is slackened on the body side, the area of the hinge must be sealed in a u-shape with sealant (1).

Tighten all screws to specified torque.
Touch up unpainted surfaces in the appropriate color.
If necessary, adjust front door.

Fig 1: Identifying Sealant Applying Area On Hinge

Courtesy of BMW OF NORTH AMERICA, INC.