41 61 000 Removing And Installing Engine Compartment Lid
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Danger of injury! Support engine hood in fully opened position with suitable apparatus.
IMPORTANT:
Removal of the hood/bonnet must be carried out with the assistance of a second person.
NOTE:
Carry over schematic representation to the relevant vehicle type.
Release nuts (1).
Tightening torque 41 61 1AZ , see 41 61 ENGINE BONNET/HOOD .
Remove hood lid.
Installation:
Install engine hood at screw locations to on hinge. This dispenses with the need for adjustment after installation.
If this is not possible, adjust ENGINE HOOD