LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2113 (Collision - Body Panel Repair (E71)) >> Body Repair General Information >> 41 00... Reinforcement Plate (Bonded) >> Notes

41 00... Reinforcement Plate (Bonded): Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

In the case of a partial replacement piece, a body component is cut at a point described in the repair instructions.

A reinforcement plate is bonded in to ensure sufficient strength.

Observe relevant service information under BODY, GENERAL .

NOTE: The following graphics serve as general illustrations of reinforcement plate repair work. They apply to sectional repairs to the structure.

Mark component in accordance with measurement a and cut.

Fig 1: Identifying Reinforcement Plate Mark Areas
G08528468Courtesy of BMW OF NORTH AMERICA, INC.