LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2113 (Collision - Body Panel Repair (E71)) >> Body Repair General Information >> 41 00... Opening Welded Connections >> 3. Opening Laser Weld Seams >> - Procedure

- Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Roughly cut roof outer skin in the roof channel to improve accessibility.

Place angle grinder with grinding disc on laser weld seam and grind through top panel. Be careful not to cut through and damage panel underneath.

Remove sheet metal flange.

scientia non olet · About LEMON Manuals