41 00... Information On Metal Filler: Processing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
The working temperature of the metal filler must be at least 18°C.
- = Metal filler
- = Hardener
NOTE:
The mixture ratio refers to the volume.
Mix metal filler in mixture ratio of 5:2. Mix components thoroughly and free of pores.
IMPORTANT:
Do not stir components. Danger of air pockets in metal filler!
Working life of the metal filler is approx. 45 minutes.