LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2106 (Front Axle - Repair) >> Stabilizer Bar >> 31 35 005 Removing and installing/replacing push rod (stabilizer link) for left/right stabilizer

31 35 005 Removing and installing/replacing push rod (stabilizer link) for left/right stabilizer

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Observe SAFETY INSTRUCTIONS for raising the vehicle
Do not mix up stabilizer links
  1. Stabilizer link for conventional stabilizer
  2. Stabilizer link for active stabilizer
Fig 1: Identifying Stabilizer Link
G04794372Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nut (1).

Installation: 

Replace self-locking nut.

Tightening torque 31 35 2AZ .

Fig 2: Identifying Nut
G04794373Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nut (1).

Remove stabilizer link (2).

Installation: 

Replace self-locking nut.

Tightening torque 31 35 2AZ .

Fig 3: Identifying Stabilizer Link And Nut
G04794374Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals