31 10 010 Removing and installing/replacing reinforcement plate
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle
Driving without reinforcement plate is not permitted!
Driving without reinforcement plate is not permitted!
Release bolts (1) for assembly underside protection at front.
Release screws (2).
Remove reinforcement plate (3).
Installation:
Replace screws.
Tightening torque 31 10 2AZ .