26 11 051 Replacing flexible disk for front propeller shaft: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove PROPELLER SHAFT from transmission and center bearing
NOTE:
To protect universal joints, tie back propeller shaft in area of center mount.
Release screws and remove flexible disc (1) from propeller shaft.
IMPORTANT:
Replace shiny ZNS bolts and self-locking nuts.
Tightening torque and angle of rotation: see 26 11 1AZ in PROPELLER SHAFT ASSEMBLY .