22 11 001 Replacing Right Engine Mount (N63)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove engine support arm . See 22 11 100 REPLACING RIGHT ENGINE SUPPORT ARM (N63) .

Release screws (1) and remove engine mount (2).

Tightening torque. See 22 11 1AZ in ENGINE AND GEARBOX SUSPENSION - TIGHTENING TORQUES (N54, N63) .

Fig 1: Identifying Engine Mount And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Holes (1) in engine mount must point to middle of vehicle.

Fig 2: Identifying Engine Mount Holes

Courtesy of BMW OF NORTH AMERICA, INC.