13 54 015 Removing And Installing/Sealing Left Throttle Valve Assembly (N63): Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Switch off ignition.
- Remove left intercooler . See 17 51 001 REMOVING AND INSTALLING/REPLACING LEFT INTERCOOLER (N63) .
Unlock plug (1) and remove.
Unfasten screws (2).
Tightening torque, see 13 54 1AZ in 13 54 THROTTLE AND ACTUATOR .
Remove throttle valve assembly (3).
Installation:
Check plug connection (1) for coolant remnants. If necessary, clean plug connection (1) with compressed air.