Carrying out injector adjustment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Connect DIS Tester
Identify car
Select "Function selection"
Select "Service functions"
Select "Engine electronics"
Select "Adjustment programs"
Select "Adjust injectors"
Change "Test schedule"
For each replaced injector, the adjustment value must be entered according to the installation position (cylinder).

Fig 1: Identifying Mark On Injector

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Vent fuel system with BMW diagnosis system.

Check fuel system for leaks.

Check function of DME.