LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2054 (Fuel System - Repair (N63)) >> Injection Nozzle And Lines >> 13 53 205 Removing and installing/replacing left rail (N63) >> Notes

13 53 205 Removing and installing/replacing left rail (N63): Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Electric fuel pump starts up automatically when door is opened! Observe warning on cylinder head cover. Disconnect battery negative terminal  (risk of fire due to short-circuiting on removal). Carry out installation work on fuel system only with coolant temperature below 40°C. See 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD .
IMPORTANT: Wear full face guard and protective gloves. Fuel can emerge spontaneously at high velocity when the high-pressure line is released!
IMPORTANT: Adhere to conditions of absolute cleanliness when working on the high-pressure fuel system. Introduced contaminants can cause malfunctions in the system!
  • Do not allow any dirt particles or foreign bodies to get into the system.
  • Remove all traces of dirt before removing pipes or individual components.
  • Use only fluff-free cloths.
  • Seal all fuel system openings with protective caps or plugs.