LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2053 (Engine Electrical System - Repair (N63)) >> Electronic Switching Or Control Unit >> 12 14 521 Replacing crankshaft pulse generator (N63) >> Installation location

Installation location

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

On transmission housing at bottom right.

Unlock plug (1) and remove.

Release screw (2).

Tightening torque 13 62 4AZ, see 13 62 SENDERS FOR CONTROL UNIT .

Withdraw pulse generator (3) from transmission housing.

Fig 1: Identifying Pulse Generator, Screw And Unlock Plug
G06178850Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Now clear the fault memory.

scientia non olet · About LEMON Manuals