12 14 512 Replacing pulse generator on left exhaust camshaft (N63): Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

(cylinder bank 1 to 4)

Necessary preliminary tasks:

Read out fault memory of DME control unit; if necessary, work through test schedules
Switch off ignition.
Remove left intake filter housing , see 13 71 030 REMOVING AND INSTALLING BOTH INTAKE FILTER HOUSINGS (N63) .

Unlock plug (1) and remove.

Release screw (2).

Tightening torque 13 32 3AZ, see 13 32 FUEL FILTER .

Remove pulse generator (3).