12 90 100 Replacing fan for electronics box
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Follow instructions for removing and installing electronic control units
, see 12 00... Notes/information on removing and installing control units .
Necessary preliminary tasks:
- Remove control unit , see 12 14 550 Replacing control unit (DME) (N63) .
- Read fault memory.
Switch off ignition.
Unclip plug (1).
Remove DDE control unit (3).
Remove relay plug-in (5) towards top.
Release screws (4).
Lift out device carrier (2).
Unfasten plug connection and disconnect.
Release air cowl (1).
Remove electric fan (2) with bracket.
Add final details to vehicle.
Read fault memory.