11 36 720 Removing and installing/replacing both solenoid valves on right side (N63): Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Always check that the solenoid valves are clean during removal and installation.
Possible malfunctions if valves are contaminated:
- Rough running
- OBD incorrect entry
- Poor exhaust gas values
- Low engine power
IMPORTANT:
Risk of damage!
Do not clean solenoid valves with compressed air.