67 16 010 Removing and Installing/Replacing Left Headlight Vertical Aim Adjuster

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Headlight removed for purposes of clarity.

Unlock spring wire clips (1) in direction of arrow.

Remove cover from headlight (2).

Installation:

Make sure cover is correctly seated on headlight (2).

Guides (3) must be exactly seated in associated locators (4).

Fig 1: Unlocking Spring Wire Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Turn headlight vertical aim adjuster (2) in direction of arrow and remove from headlight (3).

Fig 2: Turning Headlight Vertical Aim Adjuster

Courtesy of BMW OF NORTH AMERICA, INC.

Feed headlight vertical aim adjuster (1) upwards out of headlight (2) and remove.

Installation:

Make sure ball head (3) is correctly seated in locator (4).

Fig 3: Removing Headlight Vertical Aim Adjuster

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

Adjust headlights . Refer to 63 10 004 ADJUSTING HEADLIGHTS .