67 62 000 Removing and Installing Or Replacing Flat Motor For Front Left Or Right Power Window Unit

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove sound insulation in front door. Refer to 51 48 060 REMOVING AND INSTALLING/REPLACING SOUND INSULATION IN LEFT OR RIGHT FRONT DOOR (Coupe) and/or 51 48 060 REMOVING AND INSTALLING/REPLACING SOUND INSULATION IN LEFT OR RIGHT FRONT DOOR (Convertible).

Disconnect plug connection (1).

Release screw (3) and remove holder (2).

Release screws (4) and remove flat motor (5).

Tightening torque, see 67 62 1AZ in 67 62 DRIVES, POWER WINDOWS .

Installation:

Mount flat motor (5) precisely on gearing of power window regulator.

Fig 1: Identifying Plug Connection, Bracket And Flat Motor

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out normalization . Refer to 67 62... Notes On Initializing Power Window Unit In Front Door .