Properties Of The Load Including The Quality And Number Of Parts Which Can Be Turned Over All Of A Sudden

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

The convertible top must have suitable pick-up points for strain and compression element.
The contact plates of the support element must if necessary (depending on model series) be changed in order to adapt them to the shape of the main bearing so as to prevent the support spindle from sliding off.
Distance between stain and compression points min. 60 mm.