LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2042 (Body Equipment - Repair (E88)) >> Trunk Latch, Locks >> 51 24 300 Removing And Installing Or Replacing Left Or Right Gas Strut For Rear Lid

51 24 300 Removing And Installing Or Replacing Left Or Right Gas Strut For Rear Lid

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Risk of injury!

When removing both gas struts, support rear lid in fully open position with suitable apparatus.

Open rear lid.

NOTE: Make a written record of the alignment of gas strut (2) before removing.

Slide stop spring (1) to end of gas strut (2) and lever out gas strut (2).

Repeat the procedure at the other end of the gas strut (2) and remove.

Fig 1: Sliding Stop Spring To End Of Gas Strut
G04752683Courtesy of BMW OF NORTH AMERICA, INC.