LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2042 (Body Equipment - Repair (E88)) >> Trunk Latch, Locks >> 51 24 145 Removing And Installing/Replacing Button For Rear Lid Actuation >> Special Tools Required

Special Tools Required

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Move special tool 00 9 323  under front edge of button (1) and lever out button (1).

Pull button (1) out of rear lid (2).

Fig 1: Moving Special Tool 00 9 323 Under Front Edge Of Button
G04752680Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug (1) and remove button (2).

Installation: 

Perform function check with rear lid open.

Fig 2: Identifying Plug & Button
G04752681Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals