LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2042 (Body Equipment - Repair (E88)) >> Trim, Covers, Handle Trim >> 51 13 115 Removing And Installing/Replacing Cowl Panel Cover >> Build Date Up To 09/2004 With Butylene Tape

Build Date Up To 09/2004 With Butylene Tape

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Installation: 

If necessary, snap cover (2) on left and right correctly against resistance of butylene tape into retaining strip (water ingress).

Fig 1: Identifying Mucket And Cowl Panel Cover
G05779057Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals