Build Date From Approx. 09/2004
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Installation:
For build date without opening on flange, sealing foam and trapezoidal butylene tape must not be fitted (water ingress).
Sealing foam and trapezoidal butylene tape can be fitted up to build date 11/2004.
If necessary, remove trapezoidal butylene tape and sealing foam from cowl panel cover/body.
Sealing strip (1) must be fitted on cross-member (2) (water ingress).
If necessary, retrofit sealing strip (1).