51 61 011 Removing And Installing/Replacing V-Strut, Front Axle Carrier, Left Or Right
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe safety instructions for raising the vehicle. See 00...... LIFTING VEHICLE WITH A LIFTING PLATFORM .
Driving without V-struts is not permitted!
Necessary preliminary tasks:
- Remove front underbody protection
Release screws (1, 2, 3).
Remove V-strut (4) towards front.
Installation:
Replace screws.
Make sure screws are installed in correct positions.
- Screw (1) M12x30
- Screw (2) M10x33
- Screw (3) M12x35
Tightening torque, see 51 71 10AZ in 51 71 SEALS AND LOOSE BODY PARTS .