51 49 000 Removing And Installing/Replacing Panel For Rear Lid
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Release both brackets (1) and remove warning triangle.
Release screws and remove both brackets (1).
Release expansion rivets (2) and remove trim (3).
Installation:
If necessary, replace damaged expander rivets (2).