51 12 162 Removing And Installing/Replacing Rear Bumper Lower Trim (M Technic Aerodynamic Kit): Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Risk of damage!
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Release screws (1) on bumper lower trim (2).
Unclip bumper lower trim (2) along dashed line and remove.
Installation:
Catches (1) must not be damaged