51 45 185 Removing And Installing/Replacing Panel For Pedals: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) and (2).

Release expansion rivet (3).

Pull back panel (4).

Disconnect associated plug connections and remove panel (4).

Fig 1: Identifying Screws & Expansion Rivet

Courtesy of BMW OF NORTH AMERICA, INC.