51 00... Notes On Fitting Window Guide Seals: Preparations

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Heat and remove anti-friction agent residues with a hot air blower or clean new part thoroughly
Immediately prior to fitting, clean the work area with spirit in order to remove silicone and grease residues

NOTE: Air drying time approx. 1 minute