1. General notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Bonding at room and object temperature of >+18°C.
Newly painted parts may only be bonded after a drying time of at least 24 hours.
Optimal bonding/attachment to the background surface is achieved after approx. 48 hours. Components must not be exposed to mechanical strain beforehand (car wash, strength test, etc.).
Do not touch bonding surface.
It is not the length of time that pressure is applied but rather the force of pressure applied that is crucial.
Detaching the adhesive tape after pressing destroys the adhesive layer.
After being pressed on gently, adhesive tape can be pulled off again up to 3 times.