51 00... Notes On Bonding/Attaching Components With Double-Sided Adhesive Tape: Preparations

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Remove all remnants of adhesive or clean new part thoroughly
Clean the areas to be bonded immediately before bonding to remove silicone and grease residues.

NOTE: Observe ventilation time ≥ 1 minute.