51 71 041 Removing And Installing/Replacing Rear Left Or Right Wheel Arch Cover
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Prior to removing, pay attention to the exact installation position with respect to the adjoining components.
Necessary preliminary tasks:
- If necessary, remove left or right rear wheel.
NOTE:
Work shown on the E87 by way of example, deviations in detail are possible in other models.
Release screws (1 and 2).
Release nuts (3) and expander rivet (4).
Carefully feed out wheel arch cover (5) towards bottom.
Installation:
If necessary, replace expander rivet (4).
Ensure wheel arch cover (5) is correctly seated.