Special Tools Required
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
- 51 0 330 SIDE WINDOW INSTALLATION AID (DOOR)
- 51 0 341
- 51 0 342
- 51 3 010 SUCTION LIFT (2X)
- 51 3 080 TOOL
- 51 3 240 SPANNER
- 51 3 300 SPECIAL TOOL FOR DOOR WINDOW GLASS ADJUSTMENT
- 51 3 301
- 51 3 303
- 51 3 304
Prerequisite:
- Vehicle must be standing on its wheels on a level floor
- Front door correctly adjusted to fit
- Close soft top if necessary
IMPORTANT:
When closing, the door window glass must not jam on the trim strip in any area of the window (window glass breakage).
If necessary, incoming check:
The following incoming check must be carried out prior to every adjustment operation:
NOTE:
Incoming check must be carried out with the window cavity cover strip fitted.
- Denormalize power window
- Measure retraction depths with special tool 51 3 080
- Insert special tool 51 0 341 in rotary striker and close rotary striker
- Measure pretension with special tool 51 0 342
- Initialize power windows
Necessary preliminary tasks:
- Denormalize power window
- Remove outer window cavity cover strip (not for checking pretension)